15 January 2019
Windows 10 Reactivation after hardware upgrade: CONQUERED!

Regular readers are aware that I have been doing battle with re-activating Windows 10 after performing numerous major upgrades on various puters.

I had another opportunity recently to upgrade yet another machine… This time, the entire computer was replaced – except the graphics card and power supply.

Once again, I was confronted with an activation error after the upgrade.

Out of desperation, I tried something crazy… and it WORKED!

Backstory

If you’d like to read all the sordid details of my trials up to this point, see:

Episode 3: Reactivating Windows 10 after a major hardware upgrade (again)

Right. Now that that’s out of the way…

Victory at last!

This time, I did the old Microsoft Account trick, and once again, it didn’t work.

So then, I did something totally nutty: I switched back from a Microsoft Account to a local account on the upgraded puter.

And then I tried to reactivate with the same old Windows 7 product key that was originally used for the free upgrade to Win 10 on that particular machine.

Guess what?

It WORKED!

So, I guess MS is “blocking” the Microsoft Account Trick – even though their own support site says to use that technique. Whatever!

Keep it simple

Forget it. Just upgrade the machine, skip the MS account switchover before and after. When it comes time to reactivate, just go to Settings -> Update & Security -> Activation and click Change Product Key.

Enter the same product key, and Bob’s your uncle.

It appears that when Win 10 sees the new hardware, it resets the product key back to the “default” Win 10 key that will be used if you install the OS without one (yes, you can do that).

Re-entering the same valid Win 7/8 key that you used for your free upgrade to Win 10 then goes through without a hitch, and you’re re-activated… as long as you are logged in with a local account.

Hopefully this is the end of Upgrade Reactivation Madness…

Get Scottie Stuff!
VICTORY! Reactivate Windows 10 after a hardware upgrade
Tagged on:             

21 thoughts on “VICTORY! Reactivate Windows 10 after a hardware upgrade

  • Pingback: Upgrade your motherboard without reinstalling Windows 10 | Scottie's Tech.Info

  • 19 March 2019 at 00:21
    Permalink

    I planned a two-pronged upgrade: a 32-bit to 64-bit of my free Windows 10 from 32-bit Win7 upgrade, new motherboard with including cpu and memory. The software part went as it should. I logged into the user account tied to my Microsoft account. I was not activated. I had the option to Activate which I clicked on. I was asked for my Microsoft password, which I entered. Bingo! Activated again. Proof my machine was linked to my Microsoft account, Two days later I did the hardware part. That to went well. Again logged into the same user account connected to my Microsoft account. Of course not activated. Even though I had read your ENTIRE article I decided to try the the Troubleshooter anyway. Did it three times, no joy. It said the servers were busy. Really! So, I rebooted into my everyday local account. For kicks, even though I have my Win7 OEM COA, I downloaded two of those little programs that find your hidden key. They both found the same key no problem. However it was not my Win7 key. Where did it come from? No idea. I tried it. It wasn’t flagged as bad but did not work. Finally I used my Win7 COA key, and, VICTORY! All this took place March 14-18, 2019. I thank you for ALL your helpful advice.

    Reply
    • 19 March 2019 at 12:37
      Permalink

      Glad you got everything working!

      I think what Win 10 is doing after hardware upgrade is changing the product key to the “default” one that lets you install and test Win 10. I started paying attention to the key I saw after different H/W upgrades, and it’s always the same one. Re-entering the original Win 7 or Win 10 and activating with that goes through okay.

      Not sure why it’s so complicated, but at least it works.

      Reply
  • 13 April 2019 at 16:46
    Permalink

    Just updated MB, CPU, Memory and System Storage to M2 device and could not activate Win 10 Pro that I had transferred to the new M2 storage.
    Carried out your “Fix” and hey presto an activated Win 10 Pro on my upgraded system. Now I’m ready for the next PC upgrade.
    Thanks a bundle!!

    Reply
  • 20 June 2019 at 22:30
    Permalink

    Dude,

    My mobo died on me also and i build a new pc. Windows could boot with the new hardware but couldn’t activate. All the options didn’t work. Lucily, i saved my old key and your tip saved the day.
    Thanks 😀 !!!

    Reply
  • 24 July 2019 at 21:41
    Permalink

    Just used your tip and it still works.
    Afterwords though I actually tried something with the Microsoft account so I switched back.
    after I switched I went into my Microsoft account online and removed all the old PC stuff from before the upgrade. I think the reason that the system stops us from reactivating is that it still registers the original PC with the actual key on the system and it sees the the upgraded one as a fake,
    I’m not 100% sure on this and will be checking again tomorrow to see if it stays activated, but so far so good.

    Reply
    • 13 August 2019 at 10:21
      Permalink

      You were logged in with a Local account, not a Microsoft account, yes?

      If so, that’s odd. I’ve recently done a bunch more upgrades, and in every case it worked perfectly.

      I hope they didn’t change something on us again!

      Reply
  • 20 September 2019 at 09:25
    Permalink

    Man, you are genious! Thank you very much. I had problems activating WIN 10 after changing motherboard and HDD. Wasted hours fighting this problem and calling MS. You solved it!

    Reply
  • 16 November 2019 at 21:21
    Permalink

    This isn’t working for me, I tried using the key I had on local account and it doesn’t work, it says it’s not valid.
    It also says in advance, under ‘Change product key’, ‘The last product key (ID: XXXXX-…) you entered can’t be used on this copy of Windows (0x803FA067). Do you know any fix?

    Reply
    • 16 November 2019 at 22:00
      Permalink

      Was the key from Win 7 or Win 8, and if so, which version (Home, Pro, etc)?
      Which flavor of Win 10 are you trying to re-activate?

      Reply
  • 30 November 2019 at 21:00
    Permalink

    Congrats! This worked for me too. Spent hours trying to get round this after a new MB, processor install. Thought I’d chucked my old Win 7 disk out, but found it at the back of a cupboard. Worked after a bit of a delay. Thanks for that

    Reply
  • 6 December 2019 at 03:10
    Permalink

    Worked for me. Thanks!

    Reply
  • 16 December 2019 at 00:49
    Permalink

    Worked for me too. Thanks for the tip.

    Reply
  • 30 December 2019 at 22:00
    Permalink

    Still thinking about my upgrade path. I am upgrading my 2012 PC : motherboard, CPU, RAM.

    Article seems to suggest that I could use my “Windows 7 Home Upgrade” key.

    However article is based on assumption that you maintain the OS.

    I am considering reinstalling Windows 10…. and I’m not sure it will work… Since I’m using a new M.2 SSD I could try of course, but then the “digital license” will still be technically linked & used by my current (old) Win 10 installation.

    In order to first test the Windows 7 key method suggested here, I would need to * de-activate * my current Windows 10. Is there a reliable way to do this? Then I suppose, my Win 7 key may work on a fresh Win 10 installation.

    As a “plan B” I could maintain the OS, copy it to the M.2 SSD… However that leaves a bunch of old drivers and unused files behind.. .. main thing I’m worried about is left over drivers for the current (buggy) Z77X-UD5H motherboard messing with my USB 3 ports and the like. What would be ideal is if Win 10 had a “reset” switch to clean up all the drivers.

    Reply
  • 16 February 2020 at 16:20
    Permalink

    A godsend! Just upgraded my sons motherboard, processor and graphics card. This fix worked perfectly – 16/2/2020. Cheers!

    Reply
  • 25 February 2020 at 18:08
    Permalink

    My GOD You are my saviour!
    Was just on the phone to Microsoft as I couldn’t reactivate my account after changing MB, CPU and RAM.
    Before the upgrade, I linked the licence to my MS-Account as described by MS-Help.
    This didn’t help.

    The MS-Supportline told me, as I had changed not only the MB but also CPU and RAM, I had to purchase a new licence… WHAT BS ?!?!
    Anyway, this method described here works a charm! Thanks a HUGE bunch for the dead easy Workaround!
    Best regards.

    Reply
    • 25 February 2020 at 18:17
      Permalink

      MS Support is SO useless, it’s actually hilarious. They shouldn’t be allowed to call it “support”. Glad you got it sorted!

      Reply
  • 9 March 2020 at 00:33
    Permalink

    Hi,
    Just dropping a line to say thanks; my big upgrade wouldn’t re-activate until I used this local account/Win 7 key trick. Luckily, I rarely throw anything away so my old Win 7 box was still in the attic…
    All sorted now 🙂 03/08/2020

    Reply

Leave a Reply to Nicolas Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.